Connection to the Mark-10 Tension Meter
When the Fabric meter application is launched in order to perform the fabric testing, the connection to the Mark-10 tension meter should be performed as the first step.
Note:
Prior to the connection make sure that following steps are performed:
-
The COM port utilized for the machine connection is determined and defined in the Fabric Meter Settings.
To connect to Mark-10 Tension Meter:
-
Click the icon in the Status bar to connect to the machine.
-
In a case of successful connection, the icon will appear in green. In a case of failed connection, the icon will appear in red.
As an alternative, the machine connection could be performed in the Settings dialog.