Turning on the Machine

After the above safety checks and procedures have been performed, the test stand can be powered on and is ready for operation.

Turn on the test stand with the power switch located in the rear of the test stand

Demo mode

The ESM303 is shipped in Demo Mode, during which time all available functions are temporarily activated for 160 hours of operation. At power-up, a counter displays the number of hours remaining, as follows:

Press STOP to continue.

At the end of this period, any functions not originally purchased will be deactivated, and will no longer be accessible from the Test Function Setup menu.

Demo Mode can be suspended at any time by pressing and holding STOP while turning on power to the test stand. This mode can be re-enabled in the same manner and will be active for the remaining time period. Refer to the ESM303 User’s Guide for detailed instructions.

 

Deactivate Demo mode:

  1. Turn off the test stand with the power switch located in the rear of the test stand.

  2. Turn on the test stand again while pressing and holding the STOP button. The machine is turned in a regular mode (Demo mode is deactivated).

Related links