Update Notches, Darts And Pleats

Use this command to update only the notches, darts and pleats on the seam, without updating the seam geometry.

Location

  • Menu: Tools> Seam> Update notches, darts, pleats (Shift+F6)

To Update Notches, Darts and Pleats:

  1. Select piece(s) with a seam allowance.

  2. Invoke the Update Notches, Darts and Pleats command. The notches, darts and/or pleats are updated on the seam but the seam's geometry is not corrected according to the sew line.

Update Notches

  1. Original piece.

  2. After Update notches, darts and pleats.

  3. After Reseam (F6).

Update Darts

  1. Original piece.

  2. After update notches, darts and pleats.

  3. After Reseam (F6).

Update Pleats

  1. Original piece.

  2. After Update notches, darts and pleats.

  3. After Reseam (F6).