Match Segment
You can use the Match Segment tool when you are grading and want to create a grading rule on a selected point in the X/Y direction that matches the segment length of the selected segments.
To help you understand the process, color coding is used during each step in both the Match Segment dialog and in the 2D window.
Color |
Meaning |
|
Collector color in the Match Segment dialog/Segment to Match Length You need to select a segment/point. |
|
Collector color in the Match Segment dialog. The Segment to Match Length was selected and the Piece Name appears. |
|
Color of segment/point in the 2D window after it has been selected. |
|
Collector color in the Match Segment dialog/Segment to be Graded
|
|
Collector color in the Match Segment dialog. The Segment to be Graded was selected and the Piece Name appears. |
|
Color of segment/point in the 2D window after it has been selected. |
Icon & Location
-
-
Menu: Grading
-
Toolbar: Grading
-
Toolbox: Grading
-
Grading Table
To use the Match Segment tool:
Select
the Match Segment tool.
The Match Segment dialog appears:
2. Select the segment that contains grading to which you are matching the
length. You can select a segment from point to point, by clicking on two
points. The selected point is marked with an X. Once you select the segment,
the piece name of the segment and the point numbers appear in the Match Segment dialog within the
Segment to Match Length area,
as follows:
Note:
If you want to reselect a segment during the process, click the trash
icon (delete) icon, as shown below.
Click
on Segment: Select a segment by clicking anywhere on a segment
(between two grading points).
3. Select the segment that needs to be graded.
Once you select the segment, the piece name of the segment and the point
numbers appear within the Segment to
be Graded area, as follows:
Once you have selected the segments, the Point
and Direction fields become enabled.
4. In the Point area, select the radio button to determine which point on the selected segment is going to be graded: first or last.
5. In the Direction area, select the direction to match the segment lengths:
X: The grading is applied to the X direction of the point.
Y: The grading is applied to the Y direction of the point.
6. Click Ok.
The grading rule is created on the selected point and in the defined direction,
in order to match the segment lengths of the selected segments, as follows:
Note:
When the Match Segment tool is activated and you select another tool,
a Resume button displays in the
middle of the dialog. Clicking the Resume
button allows you to continue using the tool.