Snap To Axis After Rotation

When the command is activated, the piece will snap to the nearest 90 degree angle (within a range of 8 degree from the initial position). The command acts as an on/off toggle switch to control the manual rotation value of a piece when using the manual nesting.

Icon & Location

• Menu: Options> Snap to Axis after Rotation.

To snap to axis after rotation:

1. Click on the Snap to Axis after Rotation command.

2. Rotate a piece by using the Rotate Around Center Tool or the Rotate Piece Tool.
   
   Note that the piece snaps to 90 or 180 degrees.